Thursday, December 3, 2009

Typical Electrical Standard (for my own reference only)

The design, specification, installation commissioning and testing of all systems, equipment and materials shall be in accordance with the following codes and standards. Any codes and standards proposed in place of or in addition to those specified should be added:

1.1.1 SWITCHGEAR
STANDARDS
IEC 60694 (2002-01) Common specifications for high-voltage switchgear and controlgear standards
IEC 62271-100 (2003-05) High-voltage switchgear and controlgear - Part 100: High-voltage alternating current circuit-breakers
IEC 62271-102 (2003-08) High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earth switches
IEC 62271-102 Corr.3 (2005-02) Corrigendum 3
IEC 60044-1 (1996-12) Instrument transformers - Part 1: Current transformers
IEC 60044-1-am1 (2000-07) Amendment 1
IEC 60044-2 (2003-02) Instrument transformers - Part 2: Inductive voltage transformers
IEC 60358 (1990-05) Coupling capacitors and capacitor dividers
IEC 60044-3 (2002-12) Instrument transformers - Part 3: Combined transformers
IEC 60044-5 (2004-04) Instrument transformers - Part 5: Capacitor voltage transformers
IEC 60044-6 (1992-03) Instrument transformers-Part 6: Requirements for protective current transformers for transient performance
IEC 60044-7 (1999-12) Instrument transformers - Part 7: Electronic voltage transformers
IEC 60044-8 (2002-07)
Instrument transformers Instrument transformers - Part 8: Electronic current transformers
IEC 62271-203 (2003-11) High-voltage switchgear and controlgear - Part 203: Gas-Insulated metal-enclosed switchgear for rated voltages above 52kV
IEC 62271-200 (2003-11) High-voltage switchgear and controlgear - Part 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
IEC 60376 (2005-06) Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
IEC 60466 (1987-01) A.C. insulation-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and Including 38 kV
IEC 60099-1 (1999-12) Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
IEC/TR 60099-3 (1990-09) Surge arresters - Part 3: Artificial pollution testing of surge arresters
IEC 60099-4 (1998-08) Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
IEC 60099-5 (2000-03) Surge arresters - Part 5: Selection and application recommendations
IEC 60137 (1995-12) Insulating bushings for alternating voltages above 1000 V
IEC 60168 (1994-11) Tests on Indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
IEC 60168-am1 (1997-06) Amendment No. 1
IEC 60168-am2 (2000-10) Amendment 2
IEC 60383-1 (1993-04) Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
IEC 60305 (1995-12) Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of Insulator units of the cap and pin type
IEC 60865-1 (1993-10) Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
IEC 60364-1 (2005-11) Low-voltage electrical installation – Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 60364-4-41 (2005-12) Low-voltage electrical installation – Part 4-41: Protection for safety-protection against electric shock
IEC 60364-4-41-am1 (1996-02) Amendment No. 1
IEC 60364-4-41-am2 (1999-02) Amendment No. 2
IEC 60364-5-51 (2005-04) Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
IEC 60364-5-55 (2002-05) Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment
IEC 60071-1 (1993-11) Insulation co-ordination - Part 1: Definitions, principles and rules
IEC 60071-2 (1996-12) Insulation co-ordination - Part 2: Application guide
IEC/TR 60815 (1986-05) Guide for the selection of Insulators In respect of polluted conditions
IEC 971-1 Capacitor bank
BS 7354:1990 Code of practice for design of high-voltage open-terminal stations
BS 4828:1985 Guide for partial discharge measurement
BS 2898:1970 Specification for wrought aluminium and aluminium alloys for electrical purposes. Bars, extruded round tube and sections
BS 2757:1986 Method for determining the thermal classification of electrical Insulation
BS1123-1:1987 Safety valves, gauges and fusible plugs for compressed air or Inert gas Installations. Code of practice for installation
BS 5169:1992 Specification for fusion welded steel air receivers
BS 4360:1990 Specification for weldable structural steels

1.1.2 PROTECTION. METERING AND CONTROL
STANDARDS
IEC 60255-3 (1989-06) Electrical relays - Part 3: Single Input energizing quantity measuring relays with dependent or Independent time
IEC 60255-5 (2000-12) Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests
IEC 60255-6 (1988-12) Electrical relays - Part 6: Measuring relays and protection equipment
IEC 60255-8 (1990-10) Electrical relays - Part 8: Thermal electrical relays
IEC 60255-9 (1979-01) Electrical relays - Part 9: Dry reed make contact units
IEC 60255-11 (1979-01) Electrical relays - Part 11: Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays
IEC 60255-12 (1980-01) Electrical relays - Part 12: Directional relays and power relays with two Input energizing quantities
IEC 60255-13 (1980-01) Electrical relays - Part 13: Biased (percentage) differential relays
IEC 60255-14 (1981-01) Electrical relays - Part 14: Endurance tests for electrical relay contacts - Preferred values for contact loads
IEC 60255-15 (1981-01) Electrical relays - Part 15: Endurance tests for electrical relay contacts - Specification for the characteristics of test equipment
IEC 60255-16 (1982-01) Electrical relays - Part 16: Impedance measuring relays
IEC 60255-18 (1982-01) Electrical relays - Part 18: Dimensions for general purpose all-or-nothing relays
IEC 60255-19 (1983-01) Electrical relays - Part 19: Sectional specification: Electromechanical all-or-nothing relays of assessed quality
IEC 60255-19-1 (1983-01) Electrical relays - Part 19: Blank detail specification: Electromechanical all-or-nothing relays of assessed quality -Test schedules 1, 2 and 3
IEC/TR 60255-20 (1984-01) Electrical relays - Part 20: Protection (protective) systems
IEC 60255-21-1 (1988-09) Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Section One: Vibration tests (sinusoidal)
IEC 60255-21-2 (1988-10) Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Section Two: Shock and bump tests
IEC 60255-21-3 (1993-09) Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment – Section 3: Seismic tests
IEC 60255-22-1 (1988-05) Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protection equipment - Part 1: 1 MHz burst disturbance tests
IEC 60255-22-2 (1996-09) Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protection equipment - Section 2: Electrostatic discharge tests
IEC 60255-22-3 (2000-07) Electrical relays - Part 22-3: Electrical disturbance tests for measuring relays and protection equipment – Radiated electromagnetic field disturbance tests
IEC 60255-22-4 (2002-04) Electrical relays - Part 22: Electrical disturbance tests for measuring relays and protection equipment - Fast transient/burst immunity test
IEC 60255-23 (1994-10) Electrical relays - Part 23: Contact performance
IEC 60255-25 (2000-03) Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
IEC 60051-1 (1997-12) Direct acting Indicating analogue electrical measuring Instruments and their accessories - Part 1: Definitions and general requirements common to all parts
IEC 60051-2 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters
IEC 60051-3 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters
IEC 60051-4 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters
IEC 60051-5 (1985-01) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes
IEC 60051-6 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
IEC 60051-7 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments
IEC 60051-8 (1984-12) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories
IEC 60051-9 (1988-05) Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods
IEC 62053-61 (1998-02) Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements
IEC 60514 (1975-01) Acceptance inspection of Class 2 alternating-current watthour meters
IEC 61107 (1996-03) Data exchange for meter reading, tariff and load control - Direct local data exchange
IEC 60338 (1970-01) Telemetering for consumption and demand
IEC 60870-5-101 (2003-02) Telecontrol equipment and systems - Part 5: Transmission protocols - Section 101: Companion standard for basic telecontrol tasks
IEC 60870-5-101-am1 (2000-04) Amendment 1
IEC 60870-5-103 (1997-12) Telecontrol equipment and systems - Part 5-103: Transmission protocols - Companion standard for the Informative Interface of protection equipment
BS 381 C: 1996 Specification for colours for identification, coding and special purposes



1.1.3 AUXILIARY POWER AND CONTROL CABLES
STANDARDS
IEC 60228 (1978-01) Conductors of Insulated cables
IEC 60228-am1 (1993-01) Amendment No. 1
IEC 60228A (1982-01) First supplement
IEC 60227-1 (1998-03) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V- Part 1: General requirements
IEC 60227-2 (1997-11) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60227-3 (1997-11) Ed. 2.1 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 3: Non-sheathed cables for fixed wring
IEC 60227-4 (1997-12) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V- Part 4: Sheathed cables for fixed wiring
IEC 60227-5 (1998-02) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V- Part 5: Flexible cables (cords)
IEC 60227-6 (1965-01) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. - Part 6: lift cables and cables for flexible connections
IEC 60227-6-am1 (1997-12) Amendment No. 1
IEC 60227-7 (1995-12) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
IEC60055-1 (1997-05) Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC 60055-2 (1981-01) Paper-insulated metal-sheathed cables for rated voltages up to 16/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
IEC 60055-2-aml (1989-09) Amendment No. 1
BS6346:1997 Specification for 600/1000 V and 1900/3300 V armoured electric cables having PVC Insulation
BS 6121-1:1989 Mechanical cable glands - Specification for metallic glands
BS 6231:1998 Specification for PVC-insulated cables for switchgear and controlgear wiring
BS 6746:1990 Specification for PVC insulation and sheath of electric cables
BS 6500:2000 Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
BS 6360:1991 Specification for conductors in insulated cables and cords

1.1.4 LVAC SWITCHBOARDS
STANDARDS
IEC 60420 (1990-10) High-voltage alternating current switch-fuse combinations
IEC 60439-1 (2004-04) Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
IEC 60439-2 (2005-10) Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
IEC 60664-1 (2002-06) Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60947-2 (2003-04) Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60947-3 (2005-06) Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
IEC 60947-4-2 (2002-03) Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

1.1.5 DC BATTERIES AND CHARGERS
STANDARDS
IEC 60623 (2001-09) Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells
IEC 60130-17 (1998-02) Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi- directional mating, for use with rechargeable batteries
IEC 60146-1-1 (1991-04) Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specifications of basic Requirements
IEC60146-1-1-am1 (1996-07) Amendment No. 1 to IEC 146-1-1
IEC/TR 60146-1-2 (1991-04) Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guide
IEC 60146-1-3 (1991-04) Semiconductor converters - General requirements and line commutated converters - Part 1-3: Transformers and reactors
IEEE 1115-1992 Recommended practice for sizing Nickel Cadmium-batteries
IEEE 1106-1987 Recommended practice for maintenance, testing, and replacement of Nickel Cadmium storage batteries
IEEE 946-1992 Recommended practice for design of DC auxiliary power systems

1.1.6 EARTHING SYSTEMS
STANDARDS
BS 7430:1998 Code of practice for earthing
IEEE 80-1986 Guide for safety in alternating-current substation grounding
IEEE 32-1972 Standard requirements, terminology, and test procedure for neutral grounding device

1.1.7 INSPECTION AND TESTING
STANDARDS
IEC 60060-1 (1989-11) High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60060-2 (1994-11) High voltage test techniques - Part 2: Measuring systems
IEC 60060-2-am1 (1996-03) Amendment No. 1 to IEC 60-2
IEC 60427 (2000-04) Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers
IEC 60168 (2001-04) Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
IEC 60270 (2000-12) High-voltage test techniques - Partial discharge measurements
IEC 60270 Corr.1 (2001-10) Corrigendum 1
ISO 25 Accreditation standard - general requirements for the competence of calibration and testing laboratories
IEC 61000-4-2 (1995-01) Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge Immunity test Basic EMC Publication
IEC 61000-4-4 (2004-07) Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/ burst immunity test
IEC 61000-4-5 (2005-11) Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
IEC 61000-4-6 (2004-11) Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
IEC 61000-4-8 (2001-03) Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

1.1.8 ANCILLARY ELECTRICAL APPARATUS
STANDARDS
IEC 60947-1 (2004-3) Low-voltage switchgear and controlgear – Part 1: General rules
IEC 60947-4-1 (2002-12) Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
IEC 60947-7-1 (2002-07) Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors
IEC 60947-7-2 (2002-07) Low-voltage switchgear and controlgear – Part 7: Ancillary equipment – Section 2: Protective conductor terminal blocks for copper conductors
IEC 60269-1 (2005-04) Low-voltage fuses – Part 1: General requirements
IEC 60269-2 (1986-09) Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application)
IEC 60269-2-am1 (1996-11) Amendment No. 1
IEC 60269-2-1 (2004-06) Low-voltage fuses – Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) – Sections I to VI: Examples of types of standardized fuses
IEC 60269-3 (1987-06) Low-voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
IEC 60269-3-1 (2004-07) Low-voltage fuses – Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) – Sections I to IV: Examples of types of standardized fuses
IEC 60269-4 (1986-10) Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
IEC 60269-4-am1 (1995-12) Amendment No. 1
IEC 60898-1 (2003-07) Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation
IEC 60898-2 (2003-07) Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation
IEC 60072-1 (1991-03) Dimensions and output series for rotating electrical machines –Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
IEC 60072-2 (1990-12) Dimensions and output series for rotating electrical machines –Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3 (1994-03) Dimensions and output series for rotating electrical machines –Part 3: Small built-in motors – Flange numbers BF10 to BF50
IEC 60085 (2004-06) Electrical insulation – Thermal classification
IEC 60158-2 (1982-01) Low-voltage controlgear. Part 2: Semiconductor contactors (solid state contactors)
IEC 60034-5 (2000-12) Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification
IEC 60947-5-1(2003-11) Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices
IEC 60947-5-2 (2004-01) Low-voltage switchgear and controlgear – Part 5-2: Control circuit devices and switching elements – Proximity switches
IEC 60947-5-3 (2005-04) Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF)
IEC/TR2 60947-5-4 (2002-10) Low-voltage switchgear and controlgear – Part 5: Control circuit devices and switching elements – Section 4: Method of assessing the performance of low energy contacts. Special tests
IEC 60947-5-5 (2005-04) Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function
IEC 60947-5-6 (1999-12) Low-voltage switchgear and controlgear – Part 5-6: Control circuit devices and switching elements – DC interface for proximity sensors and switching amplifiers (NAMUR)
BS 6231:1998 Specification For Pvc insulated Cables For Switchgear And Controlgear Wiring
BS 822-6:1964 Terminal markings for electrical machinery and apparatus. Terminal markings for rotating electrical machinery
BS 5424-3:1988 BS 5424-3:1988 Specification for controlgear for voltages up to and including 1000 V a,c. and 1200 V d.c. Additional requirements for contactors subject to certification

1.1.9 GENERAL REQUIREMENTS
STANDARDS
IEC 60296 (2003-11) Fluids for electrotechnical applications – Unused mineral insulating oils for transformers and switchgear
IEC 60529 (2001-02) Degrees of protection provided by enclosures (IP Code)
MS ISO 9000-1994 Quality management systems
MS ISO 9001-1994
BS 3643-1:1981 ISO metric screw threads. Principles and basic data
BS 3643-2:1981 ISO metric screw threads. Specifications for selected limits of size
BS 3692:1967 Specification for ISO metric precision hexagon bolts, screws and nuts. Metric unit
BS 4190:1967 Specification for ISO metric black hexagon bolts, screws and nuts
BS 4872-1-.1982 Specification for approval testing of welders when welding procedure approval is not required. Fusion welding of steel
BS2600-1:1983 Radiographic examination of fusion welded butt joints in steel. Methods for steel 2 mm up to and Including 50 mm thick
BS EN 1435:1997 Nondestructive examination of welds. Radiographic examination of welded joints
BS 4579-1:1970 Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression Joints in copper conductors
BS 4579-2:1973 Specification for performance of mechanical and compression joints in electric cable and wire connectors. Compression joints in nickel, iron and plated copper conductors
BS 4579-3:1976 Specification for the performance of mechanical and compression joints in electric cable and wire connectors. Mechanical and compression joints in aluminum conductors
BS 2898:1970 Specification for wrought aluminium and aluminium alloys for electrical purposes. Bars, extruded round tube and sections
BS 729:1971 Specification for hot dip galvanized coatings on Iron and steel articles
BS 182:1972 Specification for galvanized line-wire for telephone and telegraph purposes
BS 443:1982 Specification for testing zinc coatings on steel wire and for quality requirements
BS EN 12540:2000 Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
BS 1133:Sec.1- 3:1989 Packaging code. Introduction to packaging
BS EN 837-1:1998 Pressure gauges. Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
BS 2765:1969 Specification for dimensions of temperature detecting elements and corresponding pockets

1.1.10 DOCUMENTATIONS
STANDARDS
IEC 61082-1 (1991-12) Preparation of documents used in electrotechnology - Part 1: General requirements
IEC 61082-1-am1 (1995-03) Amendment No. 1
IEC 61082-1-am2 (1996-07) Amendment No. 2 to IEC 1082-1
IEC 61082-2 (1993-12) Preparation of documents used in electrotechnology - Part 2: Function-oriented diagrams
IEC 61082-3 (1993-12) Preparation of documents used in electrotechnology - Part 3: Connection diagrams, tables and lists
IEC 61082-4 (1996-03) Preparation Of Documents used in Electrotechnology – Part 4: Location And Installation Documents
IEC/TR3 61082-6 (1997-04) Preparation of documents used in electrotechnology - Part 6: Index
IEC 61346-1 (1996-03) Industrial systems. Installations and equipment and Industrial products - Structuring principles and reference designations - Part 1: Basic rules
IEC 61346-2 (2000-04) Industrial Systems, Installations And Equipment And Industrial Products - Structuring Principles And Reference Designations - Part 2: Classification Of Objects And Codes For Classes
IEC/TR3 61346-4 (1998-01) Industrial systems. Installations and equipment and Industrial products - Structuring principles and reference designations - Part 4: Discussion of concepts
IEC 61175 (2005-09) Industrial systems, installations and equipment and industrial products - Designation of signals
IEC 60027-1 (1992-12) Corrected And Reprinted 1995-03-31. Letter Symbols To Be Used in Electrical Technology - Part 1: General
IEC 60027-4 (1985-09) Letter symbols to be used in electrical technology - Part 4: Symbols for quantities to be used for rotating electrical machines
IEC 60445 (1999-10) Basic and safety principles for man-machine interface, marking and Identification - Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
IEC 60446 (1999-02) Basic and safety principles for man-machine Interface, marking and identification - Identification of conductors by colours or numerals
IEC 60617-1 (1985-01) Graphical symbols for diagrams - Part 1: General Information, general Index. Cross-reference tables
IEC 60617-2 (1996-05) Graphical symbols for diagrams - Part 2: Symbol elements, qualifying symbols and other symbols having general application
IEC 60617-3 (1996-05) Graphical symbols for diagrams - Part 3: Conductors and connecting devices
IEC 60617-4 (1996-06) Graphical symbols for diagrams - Part 4: Passive components
IEC 60617-5 (1996-06) Graphical symbols for diagrams - Part 5: Semiconductors and electron tubes
IEC 60617-6 (1996-05) Graphical symbols for diagrams - Part 6: Production and conversion of electrical energy
IEC 60617-7 (1996-05) Graphical symbols for diagrams - Part 7: Switchgear, controlgear and protective devices
IEC 60617-8 (1996-05) Graphical symbols for diagrams - Part 8: Measuring Instruments, lamps and signaling devices
IEC 60617-9 (1996-05) Graphical symbols for diagrams - Part 9: Telecommunications Switching and peripheral equipment
IEC 60617-10 (1996-05) Graphical symbols for diagrams - Part 10: Telecommunications - Transmission
IEC 60617-11 (1996-05) Graphical symbols for diagrams - Part 11: Architectural and topographical installation plans and diagrams
IEC 60617-12 (1997-12) Graphical symbols for diagrams - Part 12: Binary logic elements
IEC 60617-13 (1993-02) Graphical symbols for diagrams - Part 13: Analogue elements
ISO 3098 Technical product documentation
ISO 5457 Technical drawings - Sizes and layout of drawing sheets
ISO 7200 Technical drawings - Title blocks

Friday, November 20, 2009

Construction Project - Type of Documentation

Engineering Support
Bills of Material
Calculations or Composites
Certification Dossier (Quality Control Record Book)
Data Sheets & Product Data Packs
Design Comment Sheets
Engineering & Field Sketches
Equipment List
Excavation Permit
Factory Acceptance Test (FAT)
Functional and Performance Test
HS&E -Incident Report
Inspection & Test Plan
Inspection Release Note
Inspection Report
Instrument Cable / Drum Schedule
Manufacturing Data Report Index
Manufacturing Record Book
Material Certification
Material Packages
Material Take-Off (MTO)
Method Statement / Engineering Guide
Operating & Maintenance Manual
Release Approval (Equipment)
Request for Survey
Request for Test
Samples
Spare Parts List
Specification
Technical Report / Study
Technical Schedules (incl. Bar Bending)
Test Procedure
Test Results
Type Test Certification
Welding Procedure & Qualification

Functional Document
Audit Report
Company Profile
Design Criteria
Execution Plan & Program of Work
HS&E -Health & Safety Plan
HS&E .Risk Assessment Register
Operating Philosophy
Organization Chart
Personnel Roster
Procedure, Construction
Procedure, Document Control
Procedure, Engineering Design Guide
Procedure, Information Systems & Technology
Procedure, Procurement and Sub-Contract Management Systems
Procedure, Project Controls
Procedure, Project Engineering
Procedure, Quality Assurance
Quality Assurance Plan
Resource Deployment Plan
Staff Resume
Training Instruction
Training Plan
Training Procedure
Training Report

Project Control
Daily Construction Report (Manpower and Equipment)
Daily Production Report (Quantities)
Daily Production Schedule (Quantities)
Design Report- bi-weekly
Document Submittal Schedule
Manpower Requisition Report
Material Tracking System Output
Meeting Minutes
Program Schedule- Monthly
Program Schedule- Quarterly
Program Schedule- Weekly
Progress Report- Monthly
Progress Report- Quarterly
Progress Report- Weekly

Construction project – Type of Drawings

CIVIL
Abbreviations, Symbols and General Information
Asphalt Roads
Civil Specialties, Incl. Subsurface Investigation
Demolition
Drainage and Sewers
Dredging, Bathymetry, Protection Works
Earthwork & Trenching
Exterior Firewalls
Exterior Signage
Fencing
Grading and Site Preparation
Land Acquisition, Lease, Easement, Zoning
Maps
Marine
Piles and Caissons
Profiles
Road Bridges & Railroads
Site Plans, Perspectives / Area Layouts
Slope Protection and Stabilizing Walls
Surface Markings
Surfacing, Paving, Roads
Survey
Tunneling (incl. Culvert & Manhole Details)
Walkways
Water Distribution

Concrete
Abbreviations, Symbols and General Information
Concrete
Concrete In Situ
Concrete Placement Boundaries
Concrete, Pre-cast
Decking, Steel, Permanent
Formwork, Temporary
Grouting Operations
Metal, Embedded
Reinforcing

Electrical
Abbreviations, Symbols and General Information
Auxiliary Power Distribution Panels
Bus Duct, Cable Tray and Supports
Connection / Wiring Incl. Motor Starter Interconnections
Direct Current Equipment
Electrical Installation Details
Electrical Layouts, Utilities Duct-banks and Trenching
Electrical Load List
Electronic Detection & Monitoring Devices Including Disturbance Recorder
Equipment Location
Function and Logic Diagram
Grounding
Lighting Layout
Local Power, Control & Switching
Medium and High Voltage Switchgear
Metering, Control & Protection Equipment
One Line Diagram
Power and Distribution Transformers
Schematic/Block Diagram
Switchyard/Substation and Switchroom Layouts
Termination / Junction Boxes
Wire and Cable

Structural
Abbreviations, Symbols & General Information
Arch Column Detail
Arch Detail
Beam Detail
Bracing Detail
Bridging Detail
Cantilever Beam Detail
Column Detail
Elevations & Sections
Erection Checks
Field Bolting
Field Welding
Foundations (Incl. Tank Foundations)
Framework Detail
Framework & Canopy Support
Pipe Hanger Detail
Plate Girder Detail
Platforms, Hand Rails, Stairs
Purlin Detail
Space Truss Detail
Structural Details - General
Structural Plans & General Arrangements
Structural Specialty
Tie Beam Detail
Truss Detail

Communication and Others
Abbreviations, Symbols & General Information
Fire Alarm Detection System - Block Diagrams
Fire Alarm Detection System - Details
Fire Alarm Detection System - Key Plans
Fire Alarm Detection System - Layout Drawings
Fire Alarm Detection System - Riser Diagrams

Thursday, November 19, 2009

Minutes of Monthly Meeting

Header
Contract No.:
Minutes of Project Progress Meeting No.

Date :
Venue :
Time :

Present :



Item Discussion Action By
1.0 Introduction

2.0 Confirmation of Previous Minutes Of Meeting
I
3.0 Matters Arising From Previous Minutes of Meeting
3.1 Site Organisation Chart

3.2 Civil Work Programmes / Scheduling (CPM )- Amendment
.
3.3 Revised Schedule

3.4 Drawings Submission
.
3.5 Safety and Health
.
3.6 QA & QC Manual

3.7 Sub-Contractors

3.8 Monthly Progress Report
3.8.1 Under item 2.1.2. Electrical Work: Design

3.8.2 Under item 2.1.3 Electrical Works: site Works

3.8.3 Under item 2.1.4 Electrical Work: Others

3.8.4 Under 2.2.1 Civil Works: Design

3.8.5 Under 2.2.2 Civil Works: Site Works

3.8.6 Under 2.3.1 Overall Works Progress

3.8.7 Under 2.3.4 Overall Payment Progress

3.8.8 Under 2.3.6 Civil works Payment Progress.
3.8.9 Under 3.0 : Scheduled Activity and Works for the Next Month

3.8.10 Under 3.1.1 Electrical Works: Procurement

3.8.11 Under 3.1.2 Electrical Works: Design

3.8.12 Under 3.1.1 Civil Works: Design

3.8.13 Under 3.1.2 Civil Works : Site Work

3.8.14 Under Section 4.0 : Issues and Concerns

3.8.15 In addition, XXX was reminded / informed of the followings: -

3.9 Existing DC Capacity At Engkilili and Muara Tabuan Substation

4.0 Any Other Business

5.0 Next Meeting



Minutes Prepared by:

_________¬____________

Date
Minutes Agreed by:


______________________


Date

Progress Reporting Requirement

The Contractor shall submit a detailed progress report for each month up to the agreed cut-off date. The monthly report shall contain, but not be limited to:
• A listing of late activities compared to the original planned date (early finish)
• Explanations for late activities and problem areas which are having, or are likely to have, impact on the project schedule
• Details of measures proposed to bring late activities back on schedule
• Outstanding interface data and measures proposed to expedite the issue of critical interface data
• Milestones achieved
• In addition to the schedule related activities referred to above, the monthly progress report shall also include the following:
- Covering letter and executive summary
- Problem areas (and details of measures being taken to resolve problems)
- A statement of the number of site personnel engaged in the work during the reporting period and, where relevant, details of erection equipment in use or held in readiness
- A statement of the number of accidents or other incidents resulting in damage to equipment or plant, and injury or death of personnel engaged in work on site, together with details of such accidents and incidents, and statement of corrective actions
- Document index marked up to show document status
- Purchasing schedule associated with major or significant items of equipment (to be agreed by the Employer) marked up to show status of procurement activities
- Copies of those inspection reports which identify any deviations from the quality standards in the Contract and a statement of corrective actions
• Copies of quality assurance audit reports which identify the need for corrective actions and evidence of the implementation of corrective actions
• Colour photographs showing the progress of construction
• Update of manning histograms
• Update of progress 'S' curves
• Correspondence schedule, listing all correspondence between Contractor and Employer/Employer's Representative and showing outstanding actions required